View a Larger Image of Universal Adjustable Mobile Base - HTC-2000

HTC

Universal Adjustable Mobile Base - HTC-2000

Item 150781
Model HTC-2000
1 Review
Write a Review

$79.99

Ships Today!
Shipping Info Pickup In-Store

With the HTC family of Universal Mobile Bases size is no longer an issue! Each base features side rails and corner pieces with holes spaced every 1" to ensure the perfect fit to your machine. All parts are included in this stable four-wheel design that increases machine height by less...

More Details

Details

With the HTC family of Universal Mobile Bases size is no longer an issue! Each base features side rails and corner pieces with holes spaced every 1" to ensure the perfect fit to your machine. All parts are included in this stable four-wheel design that increases machine height by less than 1". Foot operated levers lock machines to the floor. Swivel casters on 2 corners ensure excellent maneuverability. Mobile base assembles to a minimum square of 12" x 12", maximum square of 36" x 36", maximum rectangle of 20" x 52" and supports machines up to 500 lbs.

Features:

  • Fully adjustable mobile base in 1" increments to ensure the perfect fit to your machine
  • Stable hard rubber four-wheel design
  • Increases machine height by less than 1"
  • Swivel casters on 2 corners ensure excellent maneuverability
  • Foot operated levers lock machines to the floor
Specifications:
  • Dimensions - Minimum Square: 12" x 12"
  • Dimensions - Maximum Square: 36" x 36"
  • Dimensions - Maximum Rectangle: 20" x 52"
  • Weight Capacity: 500 pounds
What's Included:
  • (1) HTC - Universal Adjustable Mobile Base - Model HTC-2000

Articles & Blogs

118713075 3313481758727550 366237142982653723 o

We asked woodworker Dave Clarke, who was diagnosed with ALS in 2018, to take a look at an article Woodcraft Magazine published in Issue 44 by Pete Stephano – “The Wheelchair Woodworker Shop” – to see if he felt that the recommendations were still relevant and if he had any other advice for folks wanting to set up a workshop with modifications. Read more here...  

Read More >

Reviews

1 Review
Write a Review
  1. by on

    So far, so good.

    Purchased today to mobilize a good old cast iron Delta 14” bandsaw (circa 1974, ~200lbs, 17 1/2x16” base). Works well for now, but I’m not too confident in the plastic cam levers. The base is rated at 500lbs, but I doubt the levers will be able to withstand frequent movement for a machine that heavy for very long. We’ll see. A couple of tips that I figured out when placing the saw on the stand solo, and regarding mobility that may or may not be helpful depending on your situation: 1. Place a blanket or pillows on the ground/floor and lie your tool down on the arm/legs. 2. Dry fit the base, lie it back on the ground with the front casters disengaged/feet engaged positioned to its final orientation. Chock the stationary ( rear) casters so the base doesn’t move when tipping the tool up onto the base. Done. 3. When engaging swivel casters, the tool becomes unstable as one side is much higher than the other. Be sure to keep a firm hold of the tool until both casters are engaged. This is particularly important with tall, back-heavy tools such as a bandsaw. Overall, I’m pleased with this purchase and would recommend it for now. I will update this review if things change. Kind regards, and stay safe.

Compare With