Clear-Cut Precision Stock Guides For Table Saws
JessEm Clear-Cut TS™ Precision Stock Guides for Table Saws are the ultimate hold-down on the table saw. Multiple featherboards are required to simultaneously hold down and guide material accurately against a table saw fence. Clear-Cut TS Stock Guides operate on the same principle as a...
JessEm Clear-Cut TS™ Precision Stock Guides for Table Saws are the ultimate hold-down on the table saw. Multiple featherboards are required to simultaneously hold down and guide material accurately against a table saw fence. Clear-Cut TS Stock Guides operate on the same principle as a stock feeder in that the stock is guided at a slight angle as it is fed forward. Urethane tires on rollers with one-way needle bearings are mounted at an angle to effectively steer your stock toward the fence. Stock is pushed tightly against the fence, and the gripping force of the rollers assists in preventing kickback. All the while the roller arms work under spring pressure to ensure your material is held firmly against the table saw surface.
- Unique roller system holds down workpiece and pushes into fence for precision stock feed
- Rollers are fitted with one way roller bearings to ensure each roller spins in the direction of the feed to prevent kickback.
- Set up is fast and easy
- Quick and easy adjustments for thicker/thinner and longer/shorter stock
- When not in use they tuck away in behind the surface of your fence.
- Compatible with most T-Style commercial fences using the included HD T-Track
- Guides have 3-1/8" of total vertical travel and can be positioned anywhere along HD T-Track
- Maximum stock thickness from table saw surface to 13/16" above mounting surface when mounted to the T-Track
- (2) Adjustable Roller Arm Stock Guide Assemblies
- (1) 30" Fence mounted heavy duty T-Track
- (1) Mounting hardware (includes: #10 Self Tapping Screws, 1/4-20 x 1/2" Low Head Cap Screws, 1/4-20 Square Nuts, T-25 Torx Screwdriver, 1/8" Hex Key and #19 Drill Bit
- (1) Detailed instructions
Articles & Blogs
Woodcraft has added a brand-new safety accessory for the table saw, made by the Canadian-based JessEm® Tool Company, to its line of products. Clear-Cut TS™ Precision Stock Guides for Table Saws are the ultimate hold-down on the table saw. Multiple featherboards are required to simultaneously hold down and guide material accurately against a table saw fence.
our Fall 2021 Woodcraft
Catalog, we featured a short scoop on a Checkerboard build with one of our
interns, Nikhil Narwani. Although his only woodworking experience was in the
novice category of woodturning pens, he wanted to take this opportunity to
learn more. No better time and place to add to his resume with this experience,
than with Woodcraft and its staff of
experienced woodworkers both at the Parkersburg Woodcraft store
and from our corporate
office. You can have fun being the “King” of the workshop with this enjoyable
project build and in playing the game; it’s a win-win for everyone!
Great for one man shop
These make it so much easier to keep longer/bigger stock lined up with the fence when starting the cut.
Like having a second pair of hand when working with large sheets of plywood. Can’t believe I waited this long to buy this awesome tool.
Jesse Stock Guides
Very well built. Does exactly what it’s supposed to do and does it well. Well worth the price.
If you own a table saw, you should own this guide
I can't say enough good things about this guide: it is easy to install, super tough, it makes your cuts easier, more precise with less burning. Most importantly, it makes your saw A LOT safer - which is so important with a table saw. It pretty much eliminates kick back and takes your fingers away from the saw blade. The guides store out of the way when you don't need them. My only complaint: I didn't buy it years ago. Thank you so much Jessem and Woodcraft.
Have had this for 18 months. Will NEVER have a table saw without again. This makes my saw better, and it protects my fingers. It allows me to cut thin slices, which I do a lot for shoji and small casegoods. It holds the wood dead against the fence, drives it into the fence no matter how I push it through, and holds it without shifting while I reposition the push stick, etc. Really a must have for me - cheap since it costs less than one trip to the emergency room, and since it makes my decent saw into a better saw.
Best table saw accessory.
This allows me to rip full plywood sheets on my table saw safely and without worrying about the piece pulling from the fence. Installation was a breeze drilling 8 holes in the fence top. Very well made and precise.
My favorite table saw accessory ever
There are many things about these guides I absolutely love. 1. The ease of setup. setting these up and using them is about 10x easier than setting up any featherboard configuration I've ever used. It takes less than 5 seconds to set these up and start using them (once they are installed) 2. Anti-Kickback is better than a featherboard...by far 3. They draw the lumber into the fence. Maybe it's just me, but often sheet goods or long pieces can sometimes drift away from the fence while cutting. not a lot, but a little. The angle of the rubber tires on this jig draws the boards into the fence and I never deal with drift anymore. 4. They make woodworking safer and more accurate I use mine on a SawStop Industrial Cabinet Saw, and I could not be more pleased with the setup. I would absolutely recommend these to anyone.
I used the "yellow wheels" for years and was never very happy with them. This set is machined incredibly well and you can make adjustments in seconds. I like that the knobs are large enough to get a good grip on them. I cut a lot of sheet goods on my 52" cabinet saw and these guides make such a difference in the edges. Highly recommend them.
Outstanding addition the to my unisaw
I purchased this on sale last weekend and with an additional $50.00 gift card I paid $149.99. The installation was quick,less than fifteen minutes. Jessem includes a built in template plus a drill bit and driver. The tool is very well built. Ripping long stock using the clear cut guarantees a parallel rip. This is a must have for professionals and hobbyists.
Five stars is not enough
I purchase this accessory this past weekend. It was on sale plus I had a $50.00 dollar gift card so my out of pocket was was $149.99. A great deal. The setup took less than 15 minutes on my beismeyer fence. The built in jig and the appropriate drill, screws and driver made it simple and fast. This works great for ripping long stock. This is a must have for professionals and hobbyists. Well done!
I have been eyeing this for several months. It was on sale plus I had a fifty dollar gift card. So I paid 149.99 for it. That is only half the story. It really helps when ripping long stock. It set up very quickly on my beismeyer fence, less then 15 minutes. The included drill bit and driver were a bonus. This is a must have for professionals and hobbyists. You will love it.
After a major injury with table saw kickback, it was time to pay a lot more attention to safety. These giudes are very well made, the precision is the best and they perform better than any other guide I have ever used. Installatiom instructions were clear and very well written. Took about 15 minutes to complete. Would recommend to anyone.
I use a Felder sliding table saw, so the TS Guide is mounted on a 2" thick piece of Ipe that I had lying around. This tool is beautifully made, locks perfectly in position, and has made the ripping process so much more accurate and gives a great feeling of control and safety. Jessem supply the necessary screws, and a correctly sized drill, together with a correctly sized template built into the guide, to simplify the installation process. I am 100% impressed!
This deserves 6 stars
This is like having an extra pair of hands. Holds the stock snugly against the fence both on the infeed and the outfeed sides of the blade, making for an extremely clean cut. The bearings will NOT turn backwards, preventing kickback.