Resins for Rookies

Comments (4)

Incorporating resins and epoxies into woodworking is becoming more and more prominent. But how do you know which type to use for your project? How do you mix it? How do you make a mold? Woodcraft is here with all the answers you need to create your own one-of-a-kind turning blanks, river tables and more!

Resins 101

What is Resin and How Do You Use It?  Casting resin is the use or method of plastic casting using a liquid synthetic resin which hardens to a solid state. Urethane and epoxy resins are the two most commonly used in the woodworking and craft industries. Epoxy resins have a much lower viscosity and longer work time than urethane resins, making urethane resins an excellent choice where the resin will need to penetrate deep into cavities. 

Resins can be used to create unique pen blanks, bottle stopper blanks, handle turning stock, knife scales, encapsulation pours, bar tops and river tables.

Mix and Pour

Most epoxy resins are measured by volume; others are measured by weight. Typically the product is sold as two parts that harden when mixed together, often 1:1, but be sure to fully read and understand the manufacturer’s directions. An accurate scale, like the Precision Bench Gram Scale, is a good tool to get a proper mix.

Smaller projects like pen and bottle stopper blanks will only require are few supplies:
Measuring And Mixing Containers
Stir Stick
Digital Scale
Latex Free Gloves

For pouring river tables, bar tops and other large projects, you may also need: 
• Plastic Drop Cloth
Protective Eyewear
• Paper Towels
• Cutting Blade
Palm Sander
Disposable 2" Brush/Foam Applicator
• Propane Torch Or A Fine Mist Spray Bottle With Isopropyl Alcohol 93%

What Resin Do I Use?

For casting pens and turned items, Woodcraft Product Manager Ben Bice recommends a urethane resin like Alumilite Clear (Slow) 12-Minute Casting Resin (available in 2-lb. or 16-lb. kits). Alumilite Clear Slow offers open/work time of 12 minutes before the curing process begins.

Epoxy resins are an excellent choice for bar tops, tabletops, encapsulation, and river tables because they have a much longer open time. Bigger items that require filling larger and deeper voids up to 1-1/2" are best poured by using Alumilite Amazing Clear Cast (available in 16-ounce and 2-gallon kits, mixes 1:1) or System Three Rivercast (1.5-gallon kit, mixes 2:1). “Both systems are clear epoxy-based resins designed to be tinted and/or mixed with colored powders for a pearlescent look,” Ben said.

Alumilite Clear (Slow) 12-Minute Casting Resin - Use for pens and small turned items

Shop Alumilite

Alumilite Amazing Clear Cast - best for bar tops, tabletops, river tables

Shop Alumilite

System Three Rivercast - recommended for larger items like river tables and bar tops

Shop System Three

Do I Need a Pressure Pot?

For some epoxies like Alumilite Clear Slow, a pressure pot is not usually necessary. Gentle mixing allows any air bubbles to dissipate and evacuate on their own when used in small applications like turning blanks. “If used properly and by following manufacturer’s directions, pen blanks and bottle stopper size blanks can be cast with minimal bubbles when you aren’t using any additional materials like wood or pine cones,” Ben said. 

“If you are looking to incorporate other items such as wood, metal fillings or cactus root, the use of a pressure pot will help ensure that the resin is pushed into every nook and cranny, creating a tight, bubble-free casting.” (See article referenced at the end of this blog for tips on preparing and stabilizing wood and other materials for cast resin turnings.)

When a pressure pot is needed, the Resin Casting Pressure Pot from California Air Tools is a great option. It features a Teflon® coated steel tank for easy cleanup, removable casters for added stability, and an on/off ball valve and pressure regulator for accurate pressure settings. 

Watch Ben explain more about this heavy-duty pressure pot in this video

For deeper pours such as river tables and encapsulations, however, some heat may need to be applied to create a more flawless appearance when using epoxy resins like Clear Cast and Rivercast. To help pop bubbles at or near the surface, one tip is to spray a fine mist of isopropyl alcohol (93%) over the surface during the first hour after application. A second option is waving a propane torch over the surface. The flame should never come in contact with the resin, only the heat from the torch.

Jazz It Up

For a pop of color, dyes can be used to create opaque or translucent colors of resin. Most dyes are very concentrated, so a very small amount is all that’s needed to achieve the desired color.

Alumilite Dyes can be used in clear resin to make a translucent or pigmented color casting. Translucent colors include Green, Yellow, Red, Blue, Orange, Violet, and Ocean Blue. Opaque colors include White, Black, Fluorescent Red, Fluorescent Yellow, Fluorescent Green, and Fluorescent Pink.

Although primarily used to add a pearlescent quality, powders may also add color to the resin. Alumilite PolyClear Resin Powders can be mixed into resin to add shimmer and glitter for beautiful effects. The powders will actually change color based on how the light reflects off an object. Use by themselves or combine them with other colors to create various undertones of color. Available in Blue Pearl, Green Glow, Gold Metallic, Dark Bronze, Blue Glitter, Purple Metallic, Green Pearl, Yellow Gold, Green, Bronze Metallic, Black Glitter, Violet Pearl Metallic, Silver, Yellow Pearl, Pearl Metallic, Ocean Blue, Black Metallic, Dark Red Metallic, Bright Green, Blue Glow, Silver Glitter, Sky Blue, Copper Metallic, Crater Lake, Bronze Glitter, Gold Metallic, Purple, Cotton Candy, Copper Metallic, White Glitter, Blue-Green, Forest, Pewter, White Metallic and Red Pearl

Dyes and powders can be used in both urethane and epoxy resins. They can be used by themselves or can be combined with other colors to create various undertones of color. Refer to manufacturer’s instructions for best results.

Creating Blanks

Woodcraft offers three sizes of Lizard Blanks Casting Molds to make creating custom castings, like pen blanks, bottle stoppers and knife blocks, a breeze. These easy-to-use and reusable molds are constructed from premium UHMW (ultra-high molecular weight) plastic, which offers high abrasion, wear resistance and a glossy surface to make removal easy – and no tools are necessary to use them.

Simply pour your resin into the mold and let it cure naturally, or place into a pressure pot if desired.

The use of an anti-stick lubricant like Stoner Mold Release will make the removal of castings even easier while also prolonging the life of your urethane molds. This release agent improves molding efficiency in many processes, including injection, compression, transfer, vacuum form, pour cast, die cast and extrusion molding.

Alumilite also offers Mold Putty, a two-part platinum base silicone mold putty that allows you to make a mold in less than 20 minutes. Simply mix equal amounts of the yellow and white putty together by hand until a uniform color is achieved. Then roll it over the item to be molded. Mold Putty will cure to a flexible rubber and reproduce all the exact detail of the original piece. Use Alumidust powders in combination with Mold Putty to achieve beautiful effects in your casting project.  

More Resources

If you want to learn more about making resin-infused castings, a great resource is “Cast Resin Turning” by Keith Lackner, as featured in Woodcraft Magazine, April/May 2017 issue. Keith’s informative article discusses wood prep, making molds, estimating the volume needed, mixing the resin, curing under pressure and releasing the mold. 

You’ll also find many helpful resources, as well as classes and demos, at your local Woodcraft store, or visit us online at woodcraft.com. We’re here to help! 

We hope you’ll be inspired!


Related Products

4 Comments

Write Comment
  • TA from WHITEHOUSE
    I have a project in mind for a guitar top. I will be applying book-matched mappa burl veneer. The veneer has some small voids that I am considering filling with epoxy resin with a contrasting color and pearlescence added. Will I be able to apply lacquer or polyurethane over the resin?
  • AM from Prairie Village
    Yes. I use polyurethane on top of my epoxy projects after sanding. Fills in quite well and gives a harder protective coat.
  • ez
    i'm researching how to use resin filler for bread boards i have been making. my new ones have some cracks and holes. nothing here tells me how to mix in finely ground stones/sand, for example: garnet. can i? how? when? the boards are about 12-14" in diameter. the spaces to be filled are pretty small… thanks!
  • LH from Parkersburg
    EZ - REPLY: It sounds like you are attempting to fill voids and cracks in the cutting boards. There is no exact recipe for this as the resin will need to remain fluid enough to flow into and fill these voids and cracks. These items do however need to be mixed or added into the resin after parts A & B have been thoroughly mixed together. - Ben Bice, Woodcraft Product Manager.

Write Comment

You must be logged in to write a comment. Log In

Top of Page