Timber Wolf
Bandsaw Blade - 105" x 3/4" x 3 TPI - Thin Positive Claw
$38.39
$47.99
Save 20% - Engineered For Performance!
Timber Wolf makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a...
Details
Timber Wolf makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a unique set pattern, create a blade that is everything a wood cutting blade was meant to be. Blade has over 60% of the speed capabilities of a hook blade while giving you the great finish of a skip. The round design of the gullet eliminates any work hardening zones. Couple that with the 6.5° rake angle, 5-tooth set pattern and .025" thick thin-kerf blade and you have an awesome bandsaw blade!
Features:
- Ideal for resawing thick stock
- High silicon, low carbide steel
- Runs cooler and lasts longer
- Runs under low tension which requires less horsepower
- Thin kerf
- Blade Length: 105"
- Blade Width: 3/4"
- Blade Thickness: 0.025" thin-kerf
- Teeth Per Inch: 3 TPI
- Tooth Design: Thin Positive Claw
- Kerf: .048"
- Tooth Hook Angle: 6.5°
- Tooth Set Pattern: 5 Raker Set
- Radius of Cut: 2-1/2"
- Depth of Cut Range (Hardwood): 3” – 10”
- Depth of Cut Range (Softwood): 3” – 8”
- (1) Timber Wolf - Bandsaw Blade - 105" x 3/4" x 3 TPI - Thin Positive Claw
Articles & Blogs
Check out the Timber Wolf Bandsaw Blades
Timber Wolf Bandsaw Blades are not your typical Bandsaw Blades.
Reviews
-
Not working for me
I have never got the result from this blade like expected. I also bought a Timber Wolf 1/4" blade which works fantastic, but I use this one for resawing and it cuts super slow, burns, and cuts curved. I've tried changing the tension and have to remove pitch from the blade every use. I haven't cut anything thinker than 9" with it and even soft woods like Spanish cedar is an issue. I'm wishing I bought the 2/3 TPI instead, but I don't know if that would have been an improvement.
-
Re sawing
Upgrade from 1/2" to 3/4" for re sawing works great
-
Nice blade
Good Blade as advertised
-
Exceptional Woodcraft Customer Service
I left an earlier review with 1 star. Woodcraft called me up, UNSOLICITED, and replaced the blade for free. Actually 2, as I had bought a second and used it also with poor results. Have yet to use my two brand new blades so don't know if they are better. Woodcraft gets 10 stars for customer service.
-
Great Resaw Blade
Cuts through 12" Cypress like butter!
-
not smooth running
Blade does not track evenly due to an imprecise weld joint. Noisey and vibration.
-
Works great just as expected, no problem
Used to resaw 12" and 14" rough hard timber! During the cuts there was no binding or slow down and the cut was clean and precise.
-
Lasted longer than my old blades, but...
seemed to overheat and dull quicker than expected when milling fresh black walnut into turning blanks. I expected this blade to last much longer than this.
-
One of the best blades I've used.
I am an intermediate level wood turner.
-
Great blade!!!
Used this blade to re-saw some 8" wide walnut and figured maple using a Delta 14" with riser blocks. Cuts smoothly, and easily. Not real fast, but that is a pretty thick cut. Have used them in the past and will continue to use them in the future!
Compare With
-
$38.39
$47.99 -
$32.79
$40.99 -
$30.39
$37.99 -
$34.39
$42.99 -
$30.39
$37.99 -
$32.79
$40.99 -
$55.99
$69.99 -
$40.79
$50.99
